Carpentry and Plastering on the Gold Coast
QBCC licensed plasterersLicence No. 15576119
Carpenters Who Frame, Plaster and Paint the Wall
A new wall starts with the frame. Our carpenters build it, then the same team sheets it, sets it and paints it, so the wall is finished without bringing in anyone else.
That suits smaller carpentry too: one stud wall, a new doorway, a few rotten battens. You get one quote for the timber, the plaster and the paint.
Carpentry for Walls & Ceilings
From a few rotten battens to a new wall across a room. The frame goes in, then the plaster and paint go on.
Stud Walls & Partitions
Timber or steel stud walls to split a room, close off a space or add a study.
Ceiling Joists & Battens
Sagging or water-damaged ceilings opened up, joists and battens replaced, then sheeted again.
Doorways, Nib Walls & Openings
New door openings framed, and nib walls or wing walls built to suit the room.
Bulkhead Framing
Bulkheads framed to hide ducting, pipes or new lighting, then lined with plasterboard.
Water & Termite Damaged Framing
Damaged timber in walls and ceilings cut out and replaced before the new linings go on.
Plastering & Painting the New Framing
Once the carpentry is done, the same crew sheets, sets and paints it.
Carpentry for Gold Coast Homes and Businesses
Carpentry and plastering make offcuts and dust, so floors and furniture are covered and the area is cleaned up before we leave.
ResidentialHome Carpentry
New internal walls, doorways, ceiling joists and damaged framing in houses, units and older Queenslanders.
CommercialCommercial Carpentry
Stud partitions and bulkhead framing for offices and shops, plastered and ready to paint.
We cover floors before the saw comes out and leave the room swept and tidy.
Plaster Finish Levels Over New Framing
A straight frame makes a flat wall. Once the plasterboard is up, AS/NZS 2589 sets the levels of finish, and we suggest the level based on the light in the room and the paint going on.
Level 3: Basic finish for new walls
Joints and screws set. Fine for garages, sheds and storerooms.
Level 4: Standard finish for new walls
The level most homes get, with flat or low-sheen paint in normal light.
Most wallsLevel 5: Smoothest finish for new walls
A skim coat over the whole wall, for gloss paint or walls lit from the side.
25+ Years of Carpentry, Plastering and Painting
More than 25 years in the trade. Frames are checked straight before the plasterboard goes up, because a crooked frame shows through the paint.
How our carpenters work
Carpentry work of every size
Recent Carpentry and Plastering Projects
Walls and ceilings our team has framed, plastered and painted. Tap any photo to see it full size.
How Your Carpentry Quote Works, Step by Step
Start With a Free QuoteTell Us About the Wall or Ceiling
Use the quote form or call us. Tell us what needs building or fixing, and add photos if you can.
We Check the Framing
We look at the frame and linings, and come out to the house when the carpentry needs it.
One Quote for Carpentry, Plaster and Paint
One price for the timber, the plaster and the paint, with no obligation to go ahead.
We Build, Plaster and Paint
The same crew does the carpentry and the finishing, then cleans up before leaving.
Carpenters Across the Gold Coast & Surrounds
Our carpenters work from Coomera, Pimpama and Hope Island on the northern Gold Coast, through Southport, Surfers Paradise and Robina, down to Burleigh Heads, Palm Beach and Coolangatta on the southern Gold Coast.
Gold Coast suburbs our carpenters cover
Gold Coast & surrounding areas
Not sure if we cover your suburb? Get in touch and we will let you know.
Carpentry FAQs for the Gold Coast
Common questions about our carpentry and framing.
Questions about carpentry?
Call us about the wall, ceiling or doorway and we will talk it through.
Call (07) 5315 8349What carpentry do you do on the Gold Coast?
Internal stud walls and partitions, doorways, nib walls and bulkheads, ceiling joist and batten replacement, and repairs to water or termite damaged framing. We then plaster and paint what we build.
Can you replace sagging ceiling joists?
Yes. We open up the ceiling, replace the damaged joists and battens, then sheet, set and paint it. Where the framing is structural, we will tell you if an engineer or council approval is needed.
Are you licensed?
Yes. Gold Coast Plastering is QBCC licensed through MGH Contracting Pty Ltd (Licence No. 15576119) and All Paintworx Pty Ltd (Licence No. 15511709).
Do you clean up after carpentry work?
Yes. Floors and furniture are covered while we work, and the offcuts and dust are cleaned up before we leave.
Can you fix framing damaged by water or termites?
Yes. We cut out the damaged timber and plasterboard, replace it, then plaster and paint. We also handle insurance repairs.
Which Gold Coast suburbs do your carpenters cover?
Coomera, Pimpama and Hope Island in the north, through Southport, Surfers Paradise, Broadbeach and Robina, down to Burleigh Heads, Palm Beach and Coolangatta.
Is a carpentry quote free?
Yes. Call (07) 5315 8349 or send your details and a few photos, and we will come back to you with a free quote.
Plastering Work We Also Do on the Gold Coast
Carpentry usually ends in plaster. See our plastering for homes, businesses and older houses.
Need a Carpenter on the Gold Coast?
Tell us what needs building or fixing in your walls or ceilings. We will get back to you to arrange a free quote.
(07) 5315 8349Call for a free quote
Gold Coast & surroundsHomes & businesses
QBCC LicensedLicence No. 15576119
25+ yearsCarpentry, plaster and paint
Request a Free Carpentry Quote
Fill in your details and we will be in touch about the carpentry.